Hardware Support > ICC-5000/6000/7000

Hardware Support: ICC-5000/6000/7000 Series

The documentation, software, and support information on this page applies only to the ICC-5000/6000/7000 Series with the Intel® ZP and ZE motherboards. To find another product, please return to Hardware Support.

For additional support information regarding video and touchscreen performance, peripherals, and system utilities, be sure to check our ICC Family general issues page.

Documentation
User Manual: ICC-5000/6000 Series Industrial Control Computer™ (DOC-IWS-464E) 0.6 MBPDF icon
User Manual: ICC-7000/7100/7200 Series (DOC-IWS-495C) 0.7 MBPDF icon
User Manual: Intel® ZP Motherboard Guide, "BRO" BIOS (DOC-IWS-472) 0.1 MBPDF icon
User Manual: Intel® ZE Motherboard Guide, "BRO" BIOS (INTEL-BRO-BIOS) 0.1 MBPDF icon
Document: ZE BIOS Settings 0.1 MB

Frequently Asked Questions

  1. Can I upgrade to the latest Pentium III?
  2. How much RAM memory can it support?
  3. I've forgotten my BIOS password. How can I make changes?
  4. How can I restore BIOS default settings?<

Can I upgrade to the latest Pentium III?

Many things are possible. If you have the Intel® ZE motherboard (processor in corner, socketed cache memory), you can upgrade to a Pentium Classic 200 MHz by simply replacing the processor and fan and moving some jumpers. Refer to INTEL-BRO-BIOS for more information. By replacing the entire motherboard, with the attendant cable hassles, you can do whatever you want.

If you have the ZP motherboard (processor in middle, soldered cache memory), Pentium Classic 133 MHz is the fastest supported processor without replacing the motherboard.

Contact support@nematron.com for assistance.

How much RAM memory can it support?

Both the Intel® ZP and ZE motherboards will support a maximum of (4) 32Mb SIMMs, for a total of 128Mb RAM. Use 70ns Fast Page or 60ns EDO, non-parity, 72-pin SIMMs. Banks are arranged with two slots each, and bank 0 may have a different type and/or size than bank 1, but each slot in a bank must contain the same size and type.

I've forgotten my BIOS password. How can I make changes?

There is a DIP switch module on the motherboard. Turn power off, and DIP switch 3 on. Then turn power on and off again. Turn DIP switch 3 off. Password is now cleared.

How can I restore BIOS default settings?

There is a DIP switch module on the motherboard. Turn power off, and DIP switch 4 on. Then power on and off again. Turn DIP switch 4 off. Refer to the document "ZE BIOS Settings" for instructions on how to restore Nematron default settings.

Remember, if you didn’t find the answer here, check the ICC Family general issues page!