Hardware Support > ICC-5100/6100/7100
The documentation, software, and support information on this page applies only to the ICC-5100/6100/7100 Series with the Intel® ZE motherboard. To find another product, please return to Hardware Support.
For additional support information regarding video and touchscreen performance, peripherals, and system utilities, be sure to check our ICC Family general issues page.
| Documentation | |
| User Manual: ICC-5100/6100 Series Industrial Control Computer™ (DOC-IWS-464E) | 0.6
MB |
| User Manual: ICC-7000/7100/7200 Series (DOC-IWS-495C) | 0.7
MB |
| User Manual: Intel® ZE Motherboard Guide, "BRO" BIOS (INTEL-BRO-BIOS) | 0.1
MB |
| Document: ZE BIOS Settings | 0.1 MB |
Many things are possible. If you have the Intel® ZE motherboard (processor in corner, socketed cache memory), you can upgrade to a Pentium Classic 200 MHz by simply replacing the processor and fan and moving some jumpers. Refer to INTEL-BRO-BIOS for more information. By replacing the entire motherboard, with the attendant cable hassles, you can do whatever you want.
Contact support@nematron.com for assistance.
The Intel® ZE motherboard will support a maximum of (4) 32Mb SIMMs, for a total of 128Mb RAM. Use 70ns Fast Page or 60ns EDO, non-parity, 72-pin SIMMs. Banks are arranged with two slots each, and bank 0 may have a different type and/or size than bank 1, but each slot in a bank must contain the same size and type.
There is a DIP switch module on the motherboard. Turn power off, and DIP switch 3 on. Then turn power on and off again. Turn DIP switch 3 off. Password is now cleared.
There is a DIP switch module on the motherboard. Turn power off, and DIP switch 4 on. Then power on and off again. Turn DIP switch 4 off. Refer to the document "ZE BIOS Settings" for instructions on how to restore Nematron default settings.
Remember, if you didn’t find the answer here, check the ICC Family general issues page!