Features & Benefits

The Powerview 8000 Series is an embedded HMI with the peripheral support of a PC. Extensive Serial, USB, and Ethernet device support extend the PV-8000 Series application scope by making the integration of devices such as Barcode, Wireless and Audio Devices as natural as PC expansion. PV-8000 offers multiple storage memory media options including Hard Drive Interface and peripheral support for Printer, Keyboard and Mouse.

Enhanced PC-like Hardware Expansion

High Resolution
Display with
Enhanced Brightness

A. IDE Interface (DOM slot)
B. CompactFlash slot
C. Power connector
D. DIP SW and Reset Button
E. Mic In/LineOut
F. Com1 RS-485
   Com3 RS-485
   Com3 RS-232
G. Com1 RS-232
   Com2 RS-232
H. USB Host x 3
I. Ethernet Port 10/100
  BaseT

Nominal 2” Mounting Depth

VESA 75mm Mounting Screw Holes

4-wire Analog Resistive Touchscreen

PV-8056V1 (5.6”) back

The 8”, 10”, and 12” models have wired ports on the bottom to minimize space requirements

Model	Display	Resolution	Cutout WxH	Depth
PV-8056V1	5.6” color TFT	LCD 320 x 234	7.56” x 5.43” (192mm x 138mm)	1.88” (48mm)
PV-8080V1	8.0” color TFT	LCD 640 x 480	8.74” x 6.57” (223mm x 168mm)	1.97” (50mm)
PV-8104V1	10.4” color TFT	LCD 640 x 480	10.10” x 7.80” (259mm x 201mm)	1.97” (50mm)
PV-8121V1	12.1” SVGA TFT	LCD 800 x 600	12.00” x 9.05” (303mm x 230mm)	2.00” (51mm)


Enhanced PLC Connectivity	Wide Range of PLCs Supported	Remote Monitoring Made Easy
The PV-8000 Series supports the popular industrial Ethernet drivers - Allen-Bradley Ethernet/IP and Modbus TCP/IP. Connect via the Ethernet port to a single or multiple PLCs and using a router or switch. Three serial ports provides unique PLC communication using assigned drivers. Exchanging data between PLCs has never been easier. Data can be collected and stored in internal memory then downloaded to PLCs at a later time.	The PV-8000 Series supports over 30 communications drivers compatible with most major brand PLCs on the market today.	ViewBuilder 8000 running on a PC allows the user quicker and easier project setup. Connect one or more PV-8000 units via the Ethernet port to your PC then use the Online Simulator to display a facsimile of the PowerView unit on your PC screen to monitor data or control PLC operation.