Technical Specifications

 PROCESSOR OPTIONS

Mobile Celeron 1020E

i5 Dual Core

i7 Quad Core

Type & Processor

Intel Dual Core Celeron 1020E Intel Dual Core i5-3610ME Intel Quad Core i7-3610QE
Core Speed
2.2 GHz 2.7-3.3 GHz 2.3-3.3 GHz
Threads
2 4 8
Cores
2 2 4
L2 Cache
2MB 3MB 6MB
Chipset
Intel QM77 Express Intel QM77 Express Intel QM77 Express
Ethernet Controllers
Intel 82579LM & Intel 82583V Intel 82579LM & Intel 82583V Intel 82579LM & Intel 82583V

 MEMORY & I/O

DRAM

4GB Single Module (204-pin Dual Channel DDR3 SO-DIMM, non-ECC, unbuffered, 1600 MHz); Optional 8GB max or 16GB max 1
Drive 1 80GB SATA Solid State Drive; Optional 160GB or 300GB Solid State Drive; 500GB SATA Hybrid Hard Drive 2
Drive 2 80GB SATA Solid State Drive; Optional 160GB or 300GB Solid State Drive; 500GB SATA Hybrid Hard Drive 2; RAID Level 1 Mirroring 3
Optical Drive 1 DVD-R/W drive; No optical drive installed option (cover plate only)
Available I/O (2) USB 2.0, (4) USB 3.0 4, PS/2 Mouse & Keyboard port 5, (1) RS-232, (1) RS-485/422/432 (BIOS selectable), (1) Analog Video Port (supports dual video with integrated display), (1) HDMI Video Port, Line In/Audio Out/Mic ports 5, (2) Gigabit Ethernet 10/100/1000 Ports
Expansion Capability (2) 8.75" max length PCI slots via three backplane options: (1) PCI and (1) PCIe x16; or (2) PCI; or (1) PCIe x4 (x1 connection) and (1) PCIe x16
1 8GB and 16GB DRAM are only available with Windows 7 Ultimate 64-bit operating system.
2 Hybrid Hard Drives have a solid state adaptive memory cache to significantly increase read/write performance. These are rotating hard drives and do not carry any extra part warranty.
3 RAID not available on Windows XP.
4 USB 3.0 ports operate as USB 2.0 ports with Windows XP operating system only.
5 PS/2 and Audio ports not allowed for hazardous locations usage. Set up and maintenance only.

 DISPLAY

iPC1550KPT

Display Diagonal

15.0" (381.0mm)
Display Sizes
(Active Area H x V)
11.97" x 8.98"
(304.0mm x 228.1mm)
Native Resolution XGA, 1024 x 768
Brightness, Typical 400 Nit
Contrast Ratio, Typical 600:1
Horizon/Vertical View
Angle, CR>5, Typical
140°/120°
Backlight Life, Typical 50,000 hrs

 TOUCHSCREEN - All models

Touchscreen Technology

5-wire Analog Resistive (not applicable to the nPC400 model); No Touchscreen option available

 KEYPAD - iPC1550KPT

Keypad Technology

Keypad with 81 Alphanumeric Keys - includes full keyboard functionality with 42 Reprogrammable Function Keys and 26 Relegendable Keys

 ELECTRICAL

AC Input Voltage

100-240 VAC, 47-63 Hz
AC Input Current 2.0 A Maximum
DC Input Voltage (optional) 18-36 VDC
DC Input Current (optional) 7.5 A Max @ 24VDC
Input Power iPC1550KPT - 70W Typical
* Typical Power is measured without any additional I/O or expansion options. Any additional I/O installed during application can increase this value.

 ENVIRONMENTAL


Operating Non-operating

Temp. 1

0°C to 55°C
(0°C to 50°C with -EN option)
-20°C to 70°C
(-20°C to 60°C with -EN option)
Humidity 20% to 80% RH, noncondensing
Shock 2 15g peak acceleration, 11msec 30g peak acceleration, 11msec
Vibration 2
(5-2000 Hz)
0.006" peak to peak displacement, 1.0g max acceleration 0.015" peak to peak displacement, 2.5g max acceleration
Altitude 3 Sea level to 10,000 feet Sea level to 40,000 feet

1 Temperature specifications are for air temp surrounding the unit (i.e. inside any enclosure being utilized).

2 Shock & Vibration specifications established with Solid State drives and no rotating media.

3 Altitude specification is established by using all internal component specifications.

 AGENCY

Front Panel NEMA Rating

NEMA 4/4X/12, IP66
FCC 47 CFR, Part 15, Class A
EU CE Marking Compliance
CE, EN 55022: Class A,
EN 61000-3-3, EN 61000-6-2,
IEC 60950-1
Safety Agency Approvals
UL 508 Listed,
ANSI/ISA 12.12.01-2011 1
cUL Listed CSA 22.2, #142
cUL Listed CSA 22.2, #213 *

* Class I Division 2, Groups A, B, C, D; Class II Division 2, Groups F & G; Class III; Temp. Code T5, when installed on a flat surface of a Type 1, 4, 4X, or 12 enclosure.

1 ANSI/ISA 12.12.01-2011 is the new standard listed to show Hazardous Locations Agency Approval. UL1604 has been discontinued as of July 31, 2012.