Technical Specifications

 PROCESSOR OPTIONS

ATOM N2800

Type & Processor

Intel Dual Core ATOM N2800
Core Speed
1.86 GHz
Threads
4
Bus/Core
14
L2 Cache
1MB
Chipset
Intel NM10 Express
Video Ram
Integrated Intel GMA 3650 1
Ethernet Controller
Intel 82574L Gigabit 10/100/1000 (2 ports)
1 Video memory is allocated as needed with DVMT (Dynamic Video Memory Technology).

 MEMORY & I/O

DRAM

2GB Single Module (204-pin DDR3 SO-DIMM, non-ECC, unbuffered, 1066 MHz); Optional 4GB max
Standard Storage 80GB SATA Solid State Drive
Optional Storage 160GB or 300GB Solid State Drive; 500GB SATA Hybrid Hard Drive 2
Available I/O (1) HDMI Port, (2) USB 2.0, (2) USB 3.0, (2) RS-232, (1) RS-485/422, (1) Analog Video Port (supports dual video), (2) Ethernet 10/100/1000 Ports
2 Hybrid Hard Drives have a solid state adaptive memory cache to significantly increase read/write performance. These are rotating hard drives and do not carry any extra part warranty.

 DISPLAY

iPC1200T-N2800

iPC1500T-N2800

iPC1700T-N2800

iPC1900T-N2800

Display Diagonal

12.1" (307.34mm) 15.0" (381.0mm) 17.0" (431.8mm) 19.0" (482.6mm)
Display Sizes
(Active Area H x V)
9.69" x 7.26"
(246.0mm x 184.5mm)
11.97" x 8.98"
(304.0mm x 228.1mm)
13.30" x 10.64"
(337.9mm x 270.3mm)
14.82" x 11.85"
(376.3mm x 301.1mm)
Native Resolution SVGA, 800 x 600 XGA, 1024 x 768 SXGA, 1280 x 1024 SXGA, 1280 x 1024
Brightness, Typical 450 Nit 400 Nit 350 Nit 300 Nit
Contrast Ratio, Typical 600:1 600:1 1000:1 2000:1
Horizon/Vertical View
Angle, CR>5, Typical
140°/120° 140°/120° 170°/170° 178°/178°
Backlight Life, Typical 50,000 hrs 50,000 hrs 50,000 hrs 50,000 hrs

 TOUCHSCREEN (all models)

Touch Screen Technology

5-wire Analog Resistive
Resolution 4096 x 4096
Positional Accuracy
(Maximum Error)
0.18" (0.19" iPC1900)
4.57mm (4.83mm iPC1900)
Positional Accuracy
(Standard Deviation of Error)
< 0.08" (< 2.0 mm)
Expected Life >35,000,000 Activations

 ELECTRICAL

AC Input Voltage

100-240 VAC, 50/60 Hz
AC Input Current 1.0 A Maximum
DC Input Voltage (optional) 18-36 VDC
DC Input Current (optional) 6.0 A Max @ 24VDC
Input Power iPC1200 - 45 W Typical
iPC1500 - 45 W Typical*
iPC1700 - 55 W Typical*
iPC1900 - 65 W Typical*
* Typical Power is measured without any additional I/O or expansion options. Any additional I/O installed during application can increase this value.

 ENVIRONMENTAL


Operating Non-operating

Temp. 1

0°C to 50°C -20°C to 60°C
Humidity 20% to 80% RH, noncondensing
Shock 2 15g peak acceleration, 11msec 30g peak acceleration, 11msec
Vibration 2
(5-2000 Hz)
0.006" peak to peak displacement, 1.0g max acceleration 0.015" peak to peak displacement, 2.5g max acceleration
Altitude 3 Sea level to 10,000 feet Sea level to 40,000 feet

1 Temperature specifications are for air temp surrounding the unit (i.e. inside any enclosure being utilized).

2 Shock & Vibration specifications established with Solid State drives and no rotating media.

3 Altitude specification is established by using all internal component specifications.

 AGENCY

Front Panel NEMA Rating

NEMA 4/4X/12, IP66
FCC 47 CFR, Part 15, Class A
EU CE Marking Compliance
CE, EN 55022: Class A,
EN 61000-3-3, EN 61000-6-2,
IEC 60950-1
Safety Agency Approvals
UL 508 Listed,
ANSI/ISA 12.12.01-2011 1
cUL Listed CSA 22.2, #142
cUL Listed CSA 22.2, #213 *

* Class I Division 2, Groups A, B, C, D; Class II Division 2, Groups F & G; Class III; Temp. Code T4A, when installed on a flat surface of a Type 1, 4, 4X, or 12 enclosure.

1 ANSI/ISA 12.12.01-2011 is the new standard listed to show Hazardous Locations Agency Approval. UL1604 discontinued July 31, 2012.