Technical Specifications

 PROCESSOR OPTIONS

Celeron P4500

i5 Dual Core

i7 Dual Core

Type & Processor

Intel Dual Core Celeron P4500 Intel i5 Dual Core 520M Intel i7 Dual Core 620M
Core Speed
1.86 GHz 2.4 GHz 2.66 GHz
Threads
2 4 4
Bus/Core
14 18 20
L2 Cache
2MB 4MB 4MB
Chipset
Intel HM55 (BD82HM55 PCH) Intel HM55 (BD82HM55 PCH) Intel HM55 (BD82HM55 PCH)
Video Ram
64 MB System RAM Base 1 64 MB System RAM Base 1 64 MB System RAM Base 1
Ethernet Controller
Realtek 10/100/1000 (2 ports) Realtek 10/100/1000 (2 ports) Realtek 10/100/1000 (2 ports)
1 Additional Video RAM as needed with DVMT (Dynamic Video Memory Technology).

 MEMORY & I/O

DRAM

2GB Single Module (204-pin DDR3 SO-DIMM, non-ECC, unbuffered, 1066 MHz); Optional 4GB max
Standard Storage 80GB SATA Solid State Drive
Optional Storage Optional 160GB or 300GB Solid State Drive; 500GB SATA Hybrid Hard Drive 2
Available I/O (1) HDMI Port, (6) USB 2.0, (2) RS-232, (1) RS-485/422, (1) Analog Video Port (supports dual video), (2) Ethernet 10/100/1000 Ports
2 Hybrid Hard Drives have a solid state adaptive memory cache to significantly increase read/write performance. These are rotating hard drives and do not carry any extra part warranty.

 DISPLAY

iPC1200

iPC1500

iPC1700

iPC1900

Display Diagonal

12.1" (307.34mm) 15.0" (381.0mm) 17.0" (431.8mm) 19.0" (482.6mm)
Display Sizes
(Active Area H x V)
9.69" x 7.26"
(246.0mm x 184.5mm)
11.97" x 8.98"
(304.0mm x 228.1mm)
13.30" x 10.64"
(337.9mm x 270.3mm)
14.82" x 11.85"
(376.3mm x 301.1mm)
Native Resolution SVGA, 800 x 600 XGA, 1024 x 768 SXGA, 1280 x 1024 SXGA, 1280 x 1024
Brightness, Typical 450 Nit 400 Nit 350 Nit 300 Nit
Contrast Ratio, Typical 600:1 600:1 1000:1 2000:1
Horizon/Vertical View
Angle, CR>5, Typical
140°/120° 140°/120° 170°/170° 178°/178°
Backlight Life, Typical 50,000 hrs 50,000 hrs 50,000 hrs 50,000 hrs

 TOUCHSCREEN (all models)

Touch Screen Technology

5-wire Analog Resistive
Resolution 4096 x 4096
Positional Accuracy
(Maximum Error)
0.18" (0.19" iPC1900)
4.57mm (4.83mm iPC1900)
Positional Accuracy
(Standard Deviation of Error)
< 0.08" (< 2.0 mm)
Expected Life >35,000,000 Activations

 ELECTRICAL

AC Input Voltage

100-240 VAC, 50/60 Hz
AC Input Current 1.0 A Maximum
DC Input Voltage (optional) 18-36 VDC
DC Input Current (optional) 6.0 A Max @ 24VDC
Input Power iPC1200 - 70 W Typical
iPC1500 - 80 W Typical*
iPC1700 - 85 W Typical*
iPC1900 - 90 W Typical*
* Typical Power is measured without any additional I/O or expansion options. Any additional I/O installed during application can increase this value.

 ENVIRONMENTAL


Operating Non-operating

Temp. 1

0°C to 50°C -20°C to 60°C
Humidity 20% to 80% RH, noncondensing
Shock 2 15g peak acceleration, 11msec 30g peak acceleration, 11msec
Vibration 2
(5-2000 Hz)
0.006" peak to peak displacement, 1.0g max acceleration 0.015" peak to peak displacement, 2.5g max acceleration
Altitude 3 Sea level to 10,000 feet Sea level to 40,000 feet

1 Temperature specifications are for air temp surrounding the unit (i.e. inside any enclosure being utilized).

2 Shock & Vibration specifications established with Solid State drives and no rotating media.

3 Altitude specification is established by using all internal component specifications.

 AGENCY

Front Panel NEMA Rating

NEMA 4/4X/12, IP66
FCC 47 CFR, Part 15, Class A
EU CE Marking Compliance
CE, EN 55022: Class A,
EN 61000-3-3, EN 61000-6-2,
IEC 60950-1, RoHS compliant
Safety Agency Approvals
UL 508 Listed,
ANSI/ISA 12.12.01-2011 1
cUL Listed CSA 22.2, #142
cUL Listed CSA 22.2, #213 *

* Class I Division 2, Groups A, B, C, D; Class II Division 2, Groups F & G; Class III; Temp. Code T6, when installed on a flat surface of a Type 1, 4, 4X, or 12 enclosure.

1 ANSI/ISA 12.12.01-2011 is the new standard listed to show Hazardous Locations Agency Approval. UL1604 has been discontinued as of July 31, 2012.