Order Number Generation

Base unit configuration: nPC20-E3826-2GB-80SS-W7-24, nPC20 Node PC with Intel Dual Core Fanless ATOM E3826 processor, 2GB DRAM, 80GB Solid State Drive, Windows 7 Professional (32-bit) operating system, and 24VDC power supply.

1 8GB DRAM only available with Windows 7 Ultimate (-W7U) 64-bit operating system.
2 Solid State Drive options carry a 5-year (part-only) warranty.


nPC20 ThinClient Configurations:

ACP® ThinManager Enabled


nPC20-E3826-2GB-24-ACP

nPC20 Node PC with Intel Dual Core Fanless ATOM E3826 processor, 2GB DRAM, No storage drive, No operating system, 24VDC power supply, and ACP ThinManager Enabled

Note: This ACP ThinManager Enabled configuration does NOT contain any storage or operating system. It is configured for booting to a network via ACP protocol only. It is NOT a standalone PC. This has been verified by ACP (Automation Control Products) to be ThinManager LXi and ACP ThinManager compatible. Nematron does not supply ACP ThinManager. For application support contact ACP.

For more info on ACP: http://www.thinmanager.com


nPC20 PXE-Boot Configuration nPC20-E3826-2GB-24-PXE

nPC20 Node PC with Intel Dual Core Fanless ATOM E3826 processor, 2GB DRAM, No storage drive, No operating system, 24VDC power supply

Note: This PXE-boot configuration does NOT contain any storage or operating system. It is configured for booting to a network via the Preboot eXecution Environment (PXE) protocol only. It is NOT a standalone PC. This configuration can be used for booting to a multitude of other ThinClient applications (other than ACP ThinManager) using the PXE protocol. This has also been verified by ACP to be ThinManager LXi compatible. Nematrondoes not supply ThinClient software applications. Consult the ThinClient application software developer for support.

For more info on PXE: http://en.wikipedia.org/wiki/Preboot_Execution_Environment


Accessories

PWR-AC-nPC20
100-240 VAC Power Supply for connection directly to the nPC20. nPC20 only rated for 50°C operation when using this power supply.

NOTE: NOT allowed for use in installations where Hazardous Locations Approvals are required.


MTG-DIN-nPC20
DIN Rail section for mounting to the 75 or 100 mm VESA pattern on the rear of all M-Series monitors.