Technical Specifications

SYSTEM SPECS

Chipset

Intel 945GME + ICH7M

Video

Integrated in system chipset

Video RAM

8 MB - 128 MB (system RAM)

Processor

M440

T2500

Type

Intel Celeron

Intel Core Duo

Core Speed

1.86 GHz

2.0 GHz

Front Side Bus

533 MHz

667 MHz

L2 Cache

1MB

2MB

Ethernet Controller

Broadcom

MEMORY
DRAM Type	200-pin DDR2 SO-DIMM, non-ECC, un-buffered
DRAM Bus Speed	667 MHz (CM440 - 533 MHz)
DRAM Maximum	Single Module, 2 GB
Hard Drive Interface	2.5", SATA II
Solid State Hard Drive	40 GB (80 and 160 GB optional)
Conventional Hard Drive	250 GB minimum SATA (optional)

DISPLAY	ePC1200	ePC1500	ePC1700	ePC1900
Display Diagonal	12.1" (307.34mm)	15.0" (381.0mm)	17.0" (431.8mm)	19.0" (482.6mm)
Display Sizes (Active Area H x V)	9.69" x 7.26" (246.0mm x 184.5mm)	11.97" x 8.98" (304.0mm x 228.1mm)	13.30" x 10.64" (337.9mm x 270.3mm)	14.82" x 11.85" (376.3mm x 301.1mm)
Native Resolution	SVGA, 800 x 600	XGA, 1024 x 768	SXGA, 1280 x 1024	SXGA, 1280 x 1024
Displayable Colors	262K	16M	16M	16M
Brightness, Typical	400 Nit	300 Nit	380 Nit	300 Nit
Contrast Ratio, Typical	500:1	800:1	1000:1	2000:1
Horizon/Vertical View Angle, CR>5, Typical	130°/110°	150°/145°	170°/170°	178°/178°
Backlight Life, Typical	50,000 hrs	50,000 hrs	50,000 hrs	50,000 hrs

TOUCHSCREEN (all models)
Touch Screen Technology	5-wire Analog Resistive
Resolution	4096 x 4096
Positional Accuracy (Maximum Error)	0.18" (0.19" ePC1900) 4.57mm (4.83mm ePC1900)
Positional Accuracy (Standard Deviation of Error)	< 0.08" (< 2.0 mm)
Expected Life	>35,000,000 Activations

ELECTRICAL
AC Input Voltage	100-240 VAC, 50/60 Hz
AC Input Current	1.0 A Maximum
DC Input Voltage (optional)	18-36 VDC
DC Input Current (optional)	4.2 A Max @ 24VDC
Input Power	ePC1200/1500 - 50 W Typical* ePC1700 - 60 W Typical* ePC1900 - 70 W Typical*
* Typical Power is measured without any additional I/O or expansion options. Any additional I/O installed during application can increase this value.

ENVIRONMENTAL
	Operating	Non-operating
Temp.	0°C to 50°C	-20°C to 60°C
Humidity	20% to 80% RH, noncondensing
Shock 1	15g peak acceleration, 11msec	30g peak acceleration, 11msec
Vibration 1 (5-2000 Hz)	0.006" peak to peak displacement, 1.0g max acceleration	0.015" peak to peak displacement, 2.5g max acceleration
Altitude 2	Sea level to 10,000 feet	Sea level to 40,000 feet

1 Shock & Vibration specifications established with Solid State drives and no rotating media.

2 Altitude specification is established by using all internal component specifications.

AGENCY
Front Panel NEMA Rating	NEMA 4/4X/12, IP65
FCC	47 CFR, Part 15, Class A
EU CE Marking Compliance	CE, EN 55022: Class A, EN 61000-3-3, EN 61000-6-2, IEC 60950-1, RoHS compliant
Safety Agency Approvals	UL 508 Listed, UL 1604 Listed * cUL Listed CSA 22.2, #142 cUL Listed CSA 22.2, #213 *

* Class I Division 2, Groups A, B, C, D; Class II Division 2, Groups F & G; Class III; Temp. Code T4A, when installed on a flat surface of a Type 1, 4, 4X, or 12 enclosure